Exhibition

Home > Exhibition > Content
What are the characteristics of large flow air atomizing nozzles? Large flow type air atomizing nozzle
Sep 15, 2018

What are the characteristics of large flow air atomizing nozzles? Large flow type air atomizing nozzle

The large-flow air atomizing nozzle adopts multi-stage atomization, has good spraying effect and large flow rate, and is suitable for dust removal and desulfurization of thermal power plants and other chemical plants, dust removal and environmental protection projects of cement plants. The high-flow air atomizing nozzle adjusts the liquid flow rate and produces a desired spray effect without changing the air pressure and liquid pressure. Below Bomei introduces the large flow type air atomizing nozzle.

Large flow type air atomizing nozzle

As shown in Figure 1, the spray area: hollow cone and flat fan shape.

2, flow rate: 2 liters / minute to 80 liters / minute

3, spray angle: narrow angle and wide angle, ranging from 20 degrees to 90 degrees (other angles can be provided according to demand)

The high-flow air atomizing nozzle is a nozzle that produces a micro-mist having an average particle diameter of 10 to 50 μm (measured by a laser refraction method).

Flow type air atomizing nozzle design features

1, high efficiency design reduces the amount of compressed air used.

2, the design can still provide work in the harsh environment.

3. The large flow type air atomizing nozzle adopts three-stage atomization to achieve the desired atomization performance.

As shown in Fig. 4, the large flow type air atomizing nozzle may employ a two-fluid nozzle in which air or steam is used as the second fluid.

5, the large flow type air atomizing nozzle is suitable for most installation methods, because when the liquid pressure has a slight change, the flow rate of the liquid will change greatly. Pomeranian recommends that you use a metering pump and other metering equipment to control the liquid. flow.

The large flow type air atomizing nozzle changes the flow rate of the liquid when there is a slight change in the liquid pressure. Bomei believes that a metering pump or other metering device should be used to control the flow rate of the liquid.

ADD:No.462, Zhongyang Rd., Diankou Town, Zhuji City, Zhejiang Province, China

Phone: 13735217187

Tel: + 86-0575-87061046

Fax: + 86-0575-87555003

E-mail: info@hmisting.com

E-mail:wed@hmisting.com 

Phone: 13735217187








Copyright © Zhuji Haihang Misting Equipment Co.,Ltd All Rights Reserved.Tel: +86-575-87061046