Brass Misting Fog Nozzles

Brass Misting Fog Nozzles

Nozzle model NO.: HH-HN-BN-11 Thread: 10/24 UNC, 12/24 UNC, M5. Working pressure: 20-100 bar Spray orifice: stainless steel Orifice size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm Description: HH-HN-BN-11 is made of yellow color brass material, widely used in the high pressure mist...
Product description

Nozzle model NO.: HH-HN-BN-11            

Thread: 10/24 UNC, 12/24 UNC, M5. 

Working pressure: 20-100 bar 

Spray orifice: stainless steel 

Orifice size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm

Description: HH-HN-BN-11 is brass colour, It is the most popular type of our misting nozzles, also widely used in humidification system, patio misting system, cooling system, etc.  We export over three miliion pieces to our foreign customer. The o-ring of it now popular with green  colour, our packing box for it with blue colour and transparent.

Features:

1. Brass atomizing nozzles eliminate the need for compressed air and use hydraulic pressure to create very fine atomized sprays.

2, very small particles, the formation of spray mist effect.

3, wall mounted type, can be installed on the exterior wall, containers and pipes.

4, a variety of nozzles removable, easy to clean and install.

5, most nozzles have built-in filter.

Brass atomizing nozzle can produce fine atomization effect, the spray angle is from 45-90 degrees, and the atomized particle diameter is 10-50um. The nozzle is equipped with stainless steel nozzle core and stainless steel guide vane. It contains an anti-drip device. The liquid flows at high speed under a water pressure of 20kg-120kg. A centrifugal vortex is formed in the guide vane, and the nozzle is finely sprayed. Hollow fog particles.

This series of nozzles does not require air assistance, and the system is simple; the fog is finely atomized, atomization is sufficient, energy and water are saved, the cost is low, and the effect is good; the nozzle is not blocked, water is not leaked, the internal rotation is automatically cleaned, and the advanced forging process is adopted Stainless steel nozzles are durable and 2.5 times longer than similar nozzles.

Brass atomizing nozzles are finely machined from high-quality, solid materials such as 304 stainless steel or brass. Users can also choose SS stainless steel, BRASS brass, ceramics and other materials according to different application environments, effectively meet the requirements of high temperature resistance, corrosion resistance, wear resistance, impact resistance and so on.

 Brass Misting Fog Nozzles

 Brass Misting Fog Nozzles

 


Hot Tags: brass misting fog nozzles, China, manufacturers, suppliers, factory, for sell
Related Products
Feedback

Copyright © Zhuji Haihang Misting Equipment Co.,Ltd All Rights Reserved.Tel: +86-575-87061046