News

Home > News > Content
Introduction Of The Characteristics Of Industrial Cooling Air Atomization Nozzle
Mar 19, 2018

Air atomization nozzle is a two-fluid atomization nozzle. The features of air atomization nozzle include the spray pattern: round, fan and 360 degree without dead Angle ring shape; The characteristics of air atomization nozzle are shown by three points: the product features, selection and control of air atomizing nozzle, which are widely used in the field of cooling of the plant and the cooling of flue gas.

Air atomization nozzle is a two-fluid atomization nozzle. The features of air atomization nozzle include the spray pattern: round, fan and 360 degree without dead Angle ring shape; The characteristics of air atomization nozzle are shown by three points: the product features, selection and control of air atomizing nozzle, which are widely used in the field of cooling of the plant and the cooling of flue gas.

Product features of air atomizing nozzle:

1. There are three types of spray pattern of plastic air atomizing nozzle: round, fan and 360 degree without dead Angle ring shape. The spray effect is very small, small to spray droplets in 50 microns.

2. The air atomization nozzle has two independent entrances: liquid inlet and gas inlet. Because of its unique internal design structure, the air atomizer allows the liquid and gas to be mixed together. To achieve the effect of injection.

3. The working principle of the nozzle is that the gas in compressed air is then used to rub against each other, resulting in a very fine and uniform atomization effect.

4. Air atomization nozzle can be adjusted by needle valve to change the flow rate of injection.

5, air atomizing nozzle is by an air cap and a gas cap, can do not change the size and the size of the pressure of a gas liquid pressure, still can well to be thrown out to the atomization effect.




Copyright © Zhuji Haihang Misting Equipment Co.,Ltd All Rights Reserved.Tel: +86-575-87061046