Product

    • Outdoor Cooling System Stainless Steel Fitting

      Contact Now

      Outdoor Cooling System Stainless Steel Fitting

      Model NO.: HH-SSN-05 Size: 9.52mm(3/8”)-10/24 UNC or 12/24 UNC, 10mm--10/24 UNC or 12/24 UNC, 12mm--10/24 UNC or 12/24 UNC Description: The stainless steel compression fittings is using #304 or #316 material in the high pressure mist cooling outdoor cooling or humidification system, etc. They...

      Read More

    • Outdoor Cooling System Brass Fitting

      Contact Now

      Outdoor Cooling System Brass Fitting

      Model NO.: HH-BESS-01 Size: 6mm, 8mm 9.52mm, 10mm Description: The brass end with one hole for nozzle is used in the end of whole cooling system. Brass fitting could connect pe pipe, nylon pipe, brass pipe and stainless steel pipe. The size is with 6mm, 8mm, 9.52mm (3/8 ” )and 10mm

      Read More

    • Humidification System Brass Connecting Fitting

      Contact Now

      Humidification System Brass Connecting Fitting

      Model NO.: HH-BESF-01 Size: 6mm, 8mm 9.52mm, 10mm Description: The brass compression fittings are used for connecting pipe and nozzles in the mist cooling system, humidification system. The size of brass fittings are 6mm, 8mm, 9.52mm (3/8”)and 10mm。 And in the other side, the seat for install...

      Read More

    • Delicate Fiber Maker Tantalum Spinneret

      Contact Now

      Delicate Fiber Maker Tantalum Spinneret

      Description: The tantalum spinneret is mainly used in the chemical fiber producing. The size of it will be confirm before producing. Our tantalum used with good performance and hardness is stong.

      Read More

    • High Pressure Brass Atomizing Nozzle

      Contact Now

      High Pressure Brass Atomizing Nozzle

      Nozzle model NO.: HH-HN-SBN-11 Thread: 10/24 UNC, 12/24 UNC, M5. Working pressure: 20-100 bar Orifice size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm Description: HH-HN-BNP-22 is with cleanable anti drip system, stainless steel orifice. It is widely used in the humidification system for...

      Read More

    • High Pressure Fuel Burner Nozzle

      Contact Now

      High Pressure Fuel Burner Nozzle

      Nozzle model NO.: HH-HN-BOS-12 Thread: 9/16 NPT, 1/4 NPT Working pressure: 20-100 bar Description: HH-HN-BOS-12 is brass material with stainless steel orifice oil burner nozzle which is the same inner structure with stainless steel oil burner nozzle and stainless steel filter mesh.

      Read More

    • Cleanable Fine Mist Nozzle

      Contact Now

      Cleanable Fine Mist Nozzle

      Nozzle model NO.: HH-LN-RSNT-05 Thread: 1/8 NPT , 1/4NPT Working pressure: 3-20 bar Spray orifice: ruby Orifice size: 0.15mm, 0.2mm, 0.3mm Description: HH-LN-RSN-05 is a completely stainless steel material that with ruby orifice fog nozzle. Its impingement needle outside and ruby orifice inside...

      Read More

    • Brass Spray Atomizing Nozzle

      Contact Now

      Brass Spray Atomizing Nozzle

      Nozzle model NO.: HH-LN-SLBN-01 Thread: 6mm Working pressure: 3-20 bar Description: HH-LN-SLBN-01 is made of brass material, designed for the slip lock fittings, used for 6mm fittings. The orifice is still stainless steel,but the working pressure is in the low level.

      Read More

    • Dust Control Nozzle

      Contact Now

      Dust Control Nozzle

      Nozzle model NO.: HH-HN-OSN-05 Thread: 9/16 NPT, 1/4 NPT Working pressure: 20-100 bar Description: HH-HN-OSN-05 is stainless steel oil burner nozzle.

      Read More

    • Stainless Steel Fuel Burner Nozzle

      Contact Now

      Stainless Steel Fuel Burner Nozzle

      Nozzle model NO.: HH-HN-OSB-05 Thread: 9/16 NPT, 1/4 NPT Working pressure: 20-100 bar Description: HH-HN-OSB-05 is the same structure as HH-HN-OSN-05, also with stainless steel material. But the difference is on the filter which is solid brass filter. The fuel oil Burner Spray nozzle is mainly...

      Read More

    • Atomizing Nozzle For Green House

      Contact Now

      Atomizing Nozzle For Green House

      Nozzle model NO.: HH-LN-SLN-02 Thread: 6mm, 8mm Description: HH-LN-SLN-02 is made of nickel plated brass material, with ceramic orifice, designed for the slip lock fittings, used for 6mm and 8mm in the low pressure out door cooling system. The HH-LN-SLNF-02 is type with stainless steel filter...

      Read More

    • Brass Nozzle Extension Rod

      Contact Now

      Brass Nozzle Extension Rod

      The misting nozzle extension rod is with brass material or staniless steel material, with size is for 10/24UNC, 12/24 UNC 1/8" NPT, etc. The length is made according to customers' requirement.

      Read More

Copyright © Zhuji Haihang Misting Equipment Co.,Ltd All Rights Reserved.Tel: +86-575-87061046