Industrial nozzle, spiral nozzle and other nozzle types, even the clip nozzle made of ordinary plastic, take atomizing liquid as the ultimate goal. After a period of use, there will be phenomena such as poor atomization and insufficient strength These phenomena are mainly caused by the following reasons.
Why does the nozzle have poor atomization?
Several reasons for poor atomization of nozzle
1. Block
Some magazines or liquids to be atomized are blocked by impurities after solidification.
2. Corrosion and wear
The inlet and outlet of the nozzle are worn or stretched due to long-term consumption, especially in nozzles made of plastic materials.
3. Corrode
The internal structure of the nozzle is not smooth due to the corrosion of various chemicals.
4. Incorrect installation
Washers that deviate from the axis, over tightening or other problems that change the position can have adverse effects.
5. Temperature damage
Overheating will damage the nozzle materials designed for non high temperature applications.
6. Accidental injury
During installation and cleaning, the nozzle may be accidentally damaged due to the use of incorrect tools.
7. Bond
Splashing, fog or chemical accumulation on the materials inside or outside the nozzle edge caused by liquid evaporation can leave a dry solidification layer and block the nozzle port or internal flow channel
