The atomizing nozzle is dripping. Who is behind the scenes?
Atomizing nozzles are divided into air atomizing nozzles, siphon atomizing nozzles, fine atomizing nozzles and high-pressure atomizing nozzles. If these nozzles have dripping problems in their non-working state (closed), what is the cause? ? Let’s take a look at Shenzhen Hanbo.
1. Connection method
First of all, we need to check whether there is any problem with the connection method of the atomizing nozzle, such as whether the sealing measures are done properly (wrap the raw material tape, add raw material rubber, etc.).
2, welding connection method
If the welding of the atomization nozzle interface is not good enough, or the welding is not in place, this will cause the atomization nozzle to drip water in the closed state.
3. Is the seal inside the nozzle complete?
After the atomization nozzle is used for a long time, the internal sealing ring may be worn or corroded, which may also cause dripping problems in the closed state of the atomization nozzle.
4, nozzle aging
Atomizing nozzle is a consumable item. When the atomizing nozzle reaches its service life, it needs to be replaced with a new nozzle. Otherwise, various problems will occur due to various losses caused by long-term use.
