Cooling capacity: 5-10 ℃
Water output: 1.6-3.4 liters/hour
Spray angle: 80-90 degrees
Spray fine mist droplets: 20-40 microns
Material: Made of fiberglass reinforced polypropylene plastic
System water supply pressure: 3-14kg, each low-pressure plastic fine atomizing nozzle spray covers an area of 3-4 square meters
Performance parameters of low-pressure plastic fine atomization nozzle
The low-pressure plastic fine atomization nozzle adopts glass fiber reinforced polypropylene plastic characteristics: all components are precision produced and can spray very fine atomized particles: 20-40 microns, spray angle of 80-90 degrees, water output of 1.5-3.5 liters/hour, and system water supply pressure of 3-15 kilograms.
Each low-pressure plastic fine atomizing nozzle has a spray coverage area of 3-4 square meters and a cooling capacity of 5-10 degrees; The low-pressure plastic fine atomization nozzle structure has a filter screen, which is not easy to block and greatly extends its service life; And the low-pressure plastic fine atomization nozzle has an anti drip structure, so there will be no dripping of water when the system is shut down.
Design characteristics of low-pressure plastic fine atomization nozzle
1. Low pressure plastic fine atomizing nozzle has uniform spray distribution and wide application range of pressure and flow; The very fine droplets of spray particles can produce mist effect; The nozzle insert, core, and filter are all easy to disassemble for inspection or cleaning;
2. The low-pressure plastic fine atomization nozzle has the characteristics of large coverage area of atomized water mist, energy saving, and fast evaporation effect of water mist; The low-pressure plastic fine atomizing nozzle does not need to use compressed air, and a very fine hollow conical atomizing spray can be formed by hydraulic pressure;
3. The low-pressure plastic fine atomization nozzle has a filter screen inside, which is not easy to block and greatly extends its service life; And it has an anti drip structure, and the low-pressure plastic fine atomization nozzle will not drip water when the system pressure is turned off.
Low pressure plastic fine atomization nozzle is generally used for:
1. Factory cooling: humidification and cooling of greenhouses, flower nurseries, etc;
2. Agricultural applications: cold storage, greenhouse, livestock breeding, flower nursery, edible mushroom cultivation, greenhouse cultivation, vegetable and fruit preservation, prevention of static electricity, disinfection, haze control, dust control, etc. for humidification and cooling;
3. Industrial applications: humidification in textile factories, cigarette factories, electronic factories, paper factories, printing factories, automotive painting factories, wood (furniture) processing factories, explosives production factories, etc; Cooling of power plant buildings and steel plant buildings; Humidification and cooling of high-temperature and high humidity environmental conditions in the brewing and food industries;
3. Landscape fogging: Fine mist particles suspended in the air move with the wind like clouds and smoke, appearing and disappearing. Low pressure plastic fine atomization nozzles can create charming landscape effects; At the same time, the fine mist particles sprayed by the low-pressure plastic fine atomization nozzle contain a large number of negative ions, which increase the oxygen content of the air and greatly create and improve the living and living environment for people.
