The large flow type air atomizing nozzle adopts multistage atomization, with good spray effect and large flow, which is suitable for dust removal and desulfurization in thermal power plants and other chemical plants, as well as dust removal and environmental protection projects in cement plants. The large flow type air atomizing nozzle can adjust the liquid flow, and can produce satisfactory spray effect without changing the air pressure and liquid pressure. Below, we will introduce the high flow air atomizing nozzle.
Detailed introduction of high flow air atomizing nozzle
1. Spray area: hollow cone and flat sector
2. Flow rate: ranging from 2 liters/minute to 80 liters/minute
3. Spray angle: narrow angle and wide angle, ranging from 20 to 90 degrees (other angles can be provided as required)
A high flow air atomizing nozzle is a nozzle that produces micro mist with an average particle size of 10-50 microns (measured by laser refraction method).
Design characteristics of high flow air atomizing nozzle
1. The high-efficiency design reduces the use of compressed air.
2. Design can still provide work in harsh environments.
3. The high flow air atomizing nozzle adopts three-stage atomization to achieve ideal atomization performance.
4. High flow air atomizing nozzles can use dual fluid nozzles with air or steam as the second fluid.
5. High flow air atomizing nozzles are suitable for most installation methods because when there are small changes in liquid pressure, the flow rate of the liquid will undergo significant changes. It is recommended that you use metering pumps and other metering equipment to control the flow rate of the liquid.
