The four typical applications of high-pressure atomizing nozzles are spray fogging, humidification and cooling, atomization and dust removal, etc. In fact, the application of atomizing nozzles runs through industrial production and agricultural production, not only limited to spray fogging applications, but also can be used for Cooling, cleaning, sterilization, disinfection, fire prevention, salt field experiments, and other functions.
From a technological point of view: the nozzles of the high-pressure spray equipment are perforated by laser, which has ensured the accuracy of the holes and the accuracy of the spray flow. Each nozzle will undergo a pressure test spray test to ensure the spray effect. During operation, the high-pressure nozzle is high-pressure and must be equipped with a high-pressure host. The operating pressure needs to reach more than 50-70KG before the nozzle can be fully opened.
The high-pressure atomizing nozzle adopts a brass main body, with stainless steel nozzle core and stainless steel guide vane inside, and an anti-drip device inside. The liquid flows at a high speed under the water pressure of 10Kg-70kg, forming a centrifugal vortex in the guide vane. Very fine hollow mist particles are ejected from the nozzle holes. Using the special atmosphere Longtan net, the particle size of the fog particles is only 5-10 microns. Imported precision punching machines punch the nozzle holes, and the hole diameter is between 0.1mm-0.5mm. The free combination of nozzles can effectively adjust the amount of humidification and spray effect. The characteristics of the nozzle are that it is not easy to block, has good wear resistance, and sprays uniformly, which can effectively improve the quality and production efficiency of products, and is well-made and low-cost.
Features of high-pressure three-stage atomizing nozzle:
1. It has its own anti-floor leakage design, and the nozzle does not drip when it is stopped;
2. Comes with a 316 stainless steel filter screen, which is automatically cleaned by internal rotation and is not easy to be blocked;
3. The stainless steel spray piece is processed by an advanced forging process, with good wear resistance and uniform spraying, which is 2-5 times the life of similar nozzles.
4. This series of nozzles do not need air assistance, the system installation is simple, the spray is as fine as 3-7μm, the atomization is uniform and sufficient, and water and energy are saved.
