The internal structure design of the air atomization nozzle can make the liquid and gas mix together evenly, and the spray with the size of the micro droplets or the spray with the size of the coarse droplets can be sprayed out. In general, by increasing the gas pressure or reducing the liquid pressure, a finer spray of droplets (about 30 microns) can be obtained, resulting in a higher ratio of gas flow rate to liquid flow rate. The installation method of adjustable air atomizing nozzle can adjust the liquid flow, and the correct installation method of air atomizing nozzle can also produce satisfactory spray without changing the air pressure and liquid pressure, so it has strong adaptability.
There are many ways to install this air atomizing nozzle. Different air atomizing nozzles have different installation methods and different application fields. Through the installation of air atomizing nozzles, we can choose our own installation connectors. As shown in the figure below, quick plug connectors are used to better install and fix in the application field and achieve better spray effect.
There are many installation methods for air atomization nozzles. Each spray device consists of an air cap and a liquid cap, which can provide two spray modes, fan and round, and has a wide flow range. The inlet joint of the nozzle body comes in various sizes, and the installation method of the air atomizing nozzle is suitable for most commonly used pipelines. The above air atomizing nozzle installation components can be interchanged, which provides flexibility for obtaining different air atomizing nozzle spray performance.
