Atomizing nozzle enjoys a good reputation in the spray industry for its good spray effect. But few people know that there are actually two common spraying methods for atomizing nozzles, namely medium atomization and mechanical atomization.
1. Medium atomization
The medium atomization of the atomizing nozzle can be subdivided into bubble atomization and pneumatic atomization according to the different atomization medium.
① Bubble atomization
The advantages of the atomization method of bubble atomization are less air consumption, high atomization quality, and the atomization effect is basically not affected by the outlet diameter. Therefore, bubble atomization is more suitable for atomizing high-viscosity liquid fuels such as heavy oil and residual oil. The principle of bubble atomization is to inject compressed air into the liquid, and make the two form a stable bubble-like two-phase flow in the mixing chamber of the atomizing nozzle, which changes drastically at a very short distance from the outlet of the atomizing nozzle, prompting its sharp change. It expands until it breaks, and further breaks the liquid film wrapped around it into finer liquid mist particles.
②Pneumatic atomization
Pneumatic atomization can obtain good atomization effect under low fuel supply pressure, and can also obtain high atomization quality when using high-viscosity fuel, and can be adjusted in a wide range and used flexibly. The principle of pneumatic atomization is to rely on a certain pressure of gas to form a high-speed airflow, so as to promote the formation of a high relative velocity between the gas and fuel to achieve the purpose of atomization.
2. Mechanical atomization
Mechanical atomization mainly depends on the high-speed jet flow generated by the fuel under the action of pressure difference to atomize the fuel, and can be subdivided into three types: direct spray, centrifugal and rotary atomization.
The atomization of the atomizing nozzle can turn the liquid fuel into very fine particles and a uniform liquid mist to increase the contact area between the liquid fuel and the combustion air, which can effectively promote evaporation, so that the fuel can be fully and effectively burned, and The finer the atomized particles, the more fully the combustion will be. Therefore, choosing a good atomizing nozzle is an important way to improve production efficiency and save energy.
