What are the characteristics of adjustable atomizing nozzles
First, the working principle of adjustable atomizing nozzle
The atomizing nozzle is a device that generates a mist by the interaction of air flow and liquid flow. The special internal structure design of this device can evenly mix liquid and gas to produce a spray with a fine droplet size or a coarse droplet spray. Generally, a finer droplet spray can be obtained by increasing the gas pressure or decreasing the liquid pressure, resulting in a higher gas flow rate and liquid flow rate ratio. It can adjust the liquid flow rate, and can also produce a suitable spray under the environment that does not change the air pressure and liquid pressure, so it has strong adaptability. Each spray device consists of an air cap and liquid hair, and can provide fan-shaped and circular spray patterns with a wide flow range. The nozzle body's inlet fittings come in a variety of sizes to fit most commonly used pipes. The above nozzle parts are interchangeable, which provides flexible maneuverability for different spray performance. Due to the nozzle flow and angle, the liquid is sucked into the gas flow through the conveying pipeline and is atomized in the gas flow. Therefore, the materials of 303SS, 316SS, and 310SS stainless steel are widely used in the market.
2.Introduction of adjustable atomizing nozzle material
Adjustable atomizing nozzle is a kind of landscape dry mist humidifying and dust removing nozzle. The preferred material of adjustable atomizing nozzle is 304 stainless steel and brass, because adjustable atomizing nozzle has high requirements for the hardness of the manufacturing material. , The atomization effect must achieve a good effect. Therefore, our Austrian company decided to choose 303SS stainless steel, same as 304SS stainless steel, 316SS stainless steel, 316LSS stainless steel, and they have the following characteristics:
1.303SS adjustable atomizing nozzle: by adding a small amount of sulfur and phosphorus, it is easier to cut and process than 304, and the surface is smooth and more metallic.
2.316SS adjustable atomizing nozzle: After 316, the second most widely used steel type, mainly used in the food industry, watch and jewelry, pharmaceutical industry and surgical equipment, adding molybdenum element to make it a kind of Special structure. Because it has better resistance to chloride corrosion than 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery equipment. 18/10 grade stainless steel usually also meets this application level;
3.310S stainless steel pipe is a hollow, long, round steel, which is widely used in petroleum, chemical, medical, food, light industry, mechanical instrumentation and other industrial pipelines and mechanical structural components. In addition, when the bending and torsional strength is the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures. It is also often used in the production of various conventional weapons, barrels, and shells.
